Welcome to metroxfi.com

Here are pictures from the car show today at Logan. The car is looking good and runs really well other than out of alignment but I will fix that soon.

The car is more or less done and I just had some details to tend to. The only major thing was to repair the broken headlight cover on the passenger side. It was pretty easy just using some scrap acrylic I had from making my…

Took the car out and drove it over the weekend and the only real problem was one of the wheel bearings was bad. I had to order the bearings and wait for them to come in. They are on the car now and everything else…

finished up the belly pan today. I still need to cut a door into it for access to the bottom of the engine but I can do that when I remove it to clean up the engine bay. I used a good bit of bracing…

First thing today was painting the side skirts. I had them prepped yesterday so other than covering the tires with garbage bags and wiping the car down they were ready to paint. Now the car looks real good from the sides. The pictures don't look…

Made up the mounts for the side skirts and belly pan down the sides of the car today. Going to paint them first thing tomorrow then I can start mounting the underbelly pan. The main parts of the framing for the belly pan are in…

I put the car on jackstands and started messing with the side skirts trying to fit them in place. I got tired of squeezing under everything so I figured the easiest way to do this was get the car higher in the air so I…

Didn't get much else done on the good car today but I did get a lot of the mess cleaned up. Including loading up the old xfi shell and a bunch of scrap metal laying around in the way. There isn't much left of the…

Another day without a lot of progress that looks good on pictures. I did manage to get the passenger side camera made up. I used fiberglass on this side instead of bumper filler. It seems like either one of them works so it was no…

I made up the rear view system for the drivers side. I cut the base off the stock mirror to use as the mounting surface to attach to the car. I then aimed the camera and got it positioned how I wanted and held it…