This domain is for sale on Sedo
Doesn’t look like I did much since there are no pictures but I spent a good bit of the day sorting out the wiring. I have the shifter throttle wired up and adjusted perfectly now. It is a really smooth operating throttle. I noticed the…
Another day without much being accomplished. But at least there is some progress. I wired up the hall sensor to the controller and tried it out. The trigger is much smoother than the game controller joystick. The gauge layout seems ok but the position is…
Didn’t actually work on the car today. A friend gave me an old kids electric scooter so I could take the twist throttle and other random bits off it. So I took the throttle apart to see how it worked and it was a hall…
The rain let up for a little while today so I decided to take the car for a spin. This is the first time the car has left the garage under electric. The batteries have not been charged and I have no real controls set…
The wiring diagram that is listed on the Kelly controllers website works but the motor is pretty weak and a bit noisy wired up that way. I used a chart that listed all 36 possible combinations of hall sensor and motor wires and tried every…
I wired up the controller today. I don’t have the controls mounted in a good spot but they are hooked up and good enough to spin the tires. Here is a video of the motor spinning the tire. The next time I spun the tire…
Today I cut a slot in the axle with an angle grinder for the keyway slot. I then welded the sprocket onto the hub and slid it onto the axle. I then put the cv joint back together and put it on the car. After…
Got a few odds and ends done today. Main big thing was to get the electric motor mount made up. I didn’t get time to finish bolting it up but that will be next. Once the motor is mounted then I just need to take…
My plasma cutter decided to die today so it took me forever to cut out the mounting brackets for the motor. I managed to get the plate the motor attaches to made up and one side of the bracket made. It doesn’t look as good…
I tried using a set of front springs on the back but it didn’t give me enough extra to get the car sitting level again. I looked around and the only other springs I had available easily were the front springs off a 93 Ford…