Rick ⁽¹⁶⁶⁾

I managed to get the CV axles made up and installed today. I ended up using two axles on one side. I just stuck them both in one in the engine and one in the wheel then marked them in the center to know where…

Didn’t get a lot of time to work on it today but I at least managed to finish mounting the fuel pump and get it wired up and everything on it working properly.  With the tank assembled I figured I might as well check the…

The steering parts came in today so I put it all together. The stock rack was not long enough so I put a set of rack extenders on it to make it the proper angle so there is no bump steer. The front end is…

The hubs came back from the machine shop today. So I started putting the rear suspension together properly. I didn’t have a large enough bolt for the lower control arm mount so I will have to get one later for it. I bolted the struts…

Since I have been spending so much time with the frame I decided to take a break from that and work on the headlights. The front of the car just didn’t look like much sitting around without headlights in it. So I mounted a pair…