Rick ⁽¹⁶⁶⁾

have_posts() ) : $home_query->the_post() ?> "> - " href="" rel="bookmark">

After a overly long break from working on the car I finally got time to start back on it. I have most of the major frame work done but there are a few changes I needed to make. I don’t have enough head room in…

It is common knowledge that extending the lower lip of the bumper improves mileage by reducing overall drag of the car. So in this post I will show adding a spoiler to the front bumper of a stock 91 Metro. To start with I am using something called Fiber-Edge landscape edging, it is available at a lot of hardware stores like Lowes. It is around $35 a roll and that is enough to do a several cars. I also am using small pieces of angle iron and some self drilling screws to attach it all.

Today I worked on getting a few things mounted. I first made a few brackets to mount the gas tank in place. I had to raise it an inch and a half off the frame to clear the shifter rods. It will also need the…

Got a working shifter setup installed in the car today. Since the front wheel drive setup had a shift rod running straight out the back it was not that hard to bend a section of pipe to go around the frame and run it forward…