Got all the main wiring done in the dashboard and all the components are installed so it was time to mount the dashboard. Everything fit together pretty well except the upper bolts that hold the dash are too short so I will have to get…
I put the carpet down on the interior today and fitted the rear plastic panels around the roll bars. The carpet was easy to put down on a flat floor. It just took time to cut and fit it into place. After that was done…
I am slowly putting all the information I have gathered over the years and will post it here as I write it up. So far there is not much here but over time I will keep adding more and hopefully over time I will have…
The front end of all Geo Metros will eventually rust out unless the owner is very active in maintaining the area to protect from rust. To protect the suspension from rusting out it needs to be coated with rust proofing or even oiling it will keep rust away. If you are the owner of a Metro that is not in good shape in my opinion it is possible to repair the car without having to junk it. This is how I would do it if I was going to repair it.
Used some old computer cases and made sub boxes. I also closed up the last of the holes in the back. I need to glue up the joints but that is no big deal to finish. I also closed up a bunch of small gaps…