I put the carpet down on the interior today and fitted the rear plastic panels around the roll bars. The carpet was easy to put down on a flat floor. It just took time to cut and fit it into place. After that was done I cut the rear panels to fit so they cleared the roll bar. All I had to do from that point was put the speakers in and I would be ready for the seats to be installed. I ran the wires to the speakers and got the rear 5 1/4 set installed and ready. I started working on the subwoofer openings and the easiest way to cut the hole in the trim was to put a large drill bit in and let it cut the plastic as it moved around the hole. I put one speaker in and will get the other tomorrow.